Woman in straw hat smiles, holding wine glass near a lake.

20+

Years Of Experience

Fixing What Holds the Line

Welding repairs and fabrication for metal fences and gates in Bryan, Texas and the surrounding areas.

A gate that will not latch or a fence panel sagging off its post does not just look bad in Bryan or a surrounding area, it creates security gaps and limits property access. Metal fences and gates take a beating from weather, livestock pressure, and repeated use, and when hinges crack or frames twist, welding is often the only repair that restores full function. You need the metal reattached properly, with welds that hold under load and alignment that lets the gate swing the way it used to.


Wolf Fabrications LLC handles fence and gate welding for residential properties, ranches, and commercial yards throughout the Bryan, TX area. Repairs include broken hinges, cracked posts, bent rails, and frame reinforcements, with mobile welding available for jobs that should not leave the site. The service also covers custom gate fabrication when replacement parts are unavailable or when you need a gate built to fit a non-standard opening.


If a fence or gate on your Bryan area property needs welding work, reach out to Wolf Fabrications LLC to schedule a site visit and get the issue repaired.

What Welding Repairs Actually Fix

Gate and fence repairs start with identifying where the metal failed. In Bryan, common issues include hinges that tore away from the post, frame corners that cracked from repeated stress, and latch plates that bent or broke off. The welder removes rust or paint around the damaged area, positions the pieces back into alignment, and applies new welds to restore the joint. Clamps and jigs hold everything steady while the weld cools.


After welding, the gate swings without dragging, latches catch properly, and the frame holds its shape under normal use. Hinges stay attached to the post, rails do not sag between supports, and the entire structure regains the stiffness it had before the metal gave out. Paint or primer is applied to the welded areas to prevent rust from starting again.


Fence and gate welding does not replace rotted wood components or fix chain link tears, but it does handle every structural issue involving metal framing, hardware, and supports. Jobs range from quick hinge repairs to full gate rebuilds, and mobile welding allows the work to happen on-site without removing the gate from its hinges or cutting fence sections loose from their posts.

Answers to Gate and Fence Repair Questions

Homeowners and property managers in Bryan often ask whether a cracked gate can be repaired or if it needs replacing, how long repairs take, and whether welding works on galvanized or painted metal. These details help you decide the best path forward and what to expect when the welder arrives.

What types of gate and fence damage can welding repair?
Welding repairs cracked frames, broken hinges, torn latch plates, bent posts, and separated joints. If the metal is structurally damaged but not rusted through, welding usually restores full strength.
How long does a typical gate welding repair take?
Most gate repairs take between one and three hours depending on the damage and whether alignment or reinforcement is needed. Complex jobs or custom fabrication may take longer.
Can welding be done on galvanized or painted fences?
Yes, but the coating must be ground off at the weld area to ensure a clean bond. After welding, the exposed metal is primed or painted to match the surrounding finish.
Will welding a gate make it stronger than it was originally?
Proper welding restores the joint to its original strength, and reinforcements can be added if the design had weak points. The repaired area often becomes the strongest part of the gate.
Can a sagging gate be fixed with welding alone?
If the sag is caused by a cracked frame or loose hinge, welding fixes it. If the sag comes from a twisted post or foundation shift, the post may need realignment or resetting first.

Wolf Fabrications LLC responds to fence and gate welding calls throughout Bryan, handling both emergency repairs and planned upgrades. Call the team to describe the damage, and they will confirm whether mobile welding or shop work is the better fit for your project.